Taber’s Quality Management System (QMS) integrates the requirements of its customers, vendors, employees, and management based on the information gathered at the monthly staff meetings, and the annual Management Review. The Management Review, customer demands, the availability of purchased products, market changes, personnel, infrastructure needs, and the risks associated with each of these areas are taken into consideration when reviewing the QMS each year. The QMS is one part of the overall business system for Taber Industries.
All employees of Taber Industries are committed to providing its customers with quality products and services that continually meet customer expectations and requirements. Taber strives to enhance customer satisfaction through the continual improvement of our QMS.
What is AS9100?
Governing body: SAE International
Quality Management Systems – Requirements for Aviation, Space, and Defense Organizations
This standard includes ISO 9001:2015quality management system requirements and specifies additional aviation, space, and defense industry requirements, definitions, and notes.
This International Standard specifies requirements for a quality management system when an organization:
1. Needs to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements, and
2. Aims to enhance customer satisfaction through the effective application of the system, including processes for improvement of the system and the assurance of conformity to customer and applicable statutory and regulatory requirements.
Parts Management Plan
– Counterfeit prevention
– Full traceability
– Part procurement from OEM or authorized distributor only
• Flight Safety Program
• Major customers have approved Taber’s QMS which includes quality procedures such as:
– ESD Control(Electrostatic Discharge)
– Soldering Procedures
– Special Process and Welding Procedures
– Many Others
• IPC J-STD-001 Class 3 Certified Trainer
Taber Industries takes pride in our achievement of providing quality instrumentation that meets customer application requirements and expectations. The Taber Industries Quality Management System is guided by the following controls:
|Workmanship||IPC J-STD-001 Class 3, w/Space Addendum (when required by customer) performedby certified IPC Specialists (Formerly NASA STD 8739.1A, NASA STD 8739.2, NASA STD 8739.3)|
|Calibration||MIL-I-452081 & MIL-STD-45662A|
|Welding||NASA STD 8739.3 (Not formerly approved)|
MIL-I-452081 & MIL-STD-45662A
MIL-STD-45662A, ANSI/NCSL Z540-1, NIST
AWS D17.1.M, NASA STD 5006
What is RoHS?
Restriction of Hazardous Substances
RoHS is a product-level compliance based on the European Union’s Directive 2002/95/EC, the Restriction of the Use of certain Hazardous Substances in Electrical and Electronic Equipment (RoHS).
Products compliant with this directive do not exceed the allowable amounts of the following restricted materials:
1. Cadmium (Cd): <100 ppm 2. Lead (Pb): < 1000 ppm 3. Mercury (Hg): < 1000 ppm 4.Hexavalent Chromium: (Cr VI) < 1000 ppm 5. Polybrominated Biphenyls (PBB): < 1000 ppm 6. Polybrominated Diphenyl Ethers (PBDE): < 1000 ppm 7. Bis (2-Ethylhexyl) phthalate (DEHP): < 1000 ppm 8. Benzyl butyl phthalate (BBP): < 1000 ppm 9. Dibutyl phthalate (DBP): < 1000 ppm 10. Diisobutyl phthalate (DIBP): < 1000 ppm
Any business that sells applicable electrical or electronic products, equipment, sub-assemblies, cables, components, or spare parts directly to RoHS-directed countries, or sells to resellers, distributors, or integrators that in turn sell products to these countries, is impacted if they utilize any of the restricted 10 substances.
CMMC 2.0 Level 2 Compliance and Certification.
CMMC 2.0 is the next iteration of the Department’s CMMC cybersecurity model. It streamlines requirements to three levels of cybersecurity – Foundational, Advanced, and Expert –and aligns the requirements at each level with well-known and widely accepted NIST cybersecurity standards.
Taber Industries is in the process of gaining CMMC 2.0 Level 2 (NIST SP 800-171) Compliance by the end of 2022 and Certification by the U.S. Department of Defense when available.